F.MH.2A5.21.25 IEC Plug Filter Dimensions in mm

• This filter gives high performance in RFI Suppression for symmetrical and asymmetrical interference with good screening effect. It also has the advantage of combining a built-in power line connector according to IEC, 1 or 2 fuse holders for US and IEC fuses with a bipolar rocker switch and a voltage selector. Applications for this filter include computers, robotics, test equipment, SMPS, etc. Note:The above model shown is with one fuse holder and a rocker switch. If a lighted rocker switch is needed, or if two fuse holders are required, please call us at 631-563-9568 for a price quote.
• Approvals: UL 1283, CSA 22.2 No. 8, VDE 0565-3, and ASEV 1055
• Manufacture: metal case with built-in power line connector according to IEC 320. Model shown here is with a fuse holder for 1 fuse (models available with 2 fuses also), bipolar rocker switch, voltage selector (110/220 Vac); internal components sealed with self-extinguishing resin.
• Connections: IEC 320 - Standard plug (INPUT); faston 6.3 x 0.8 mm (OUTPUT); ground terminal connected to case.
• Rated Voltage(VR)=max 250V 50/60 Hz
• Rated Current(IR) at 40 degrees C=2.5A
• Voltage Test (2 s): line to ground 3000 Vdc or 1800 Vac, line to line 1700 Vdc
• Climate Category: HPF (25/085/21); temp range -25c to +85c
• Leakage Current (IL): at 220V, 50 Hz, max value=2 x 0.43
• Bipolar rocker switch: 6 (4) A/250 Vac (Rated Current), 50000 on-off operations; values in () relate to the inductive current charge; inrush current test according to UL 1054 (35A).
• Typical insertion loss (dB) = >40@1MHz, >60@10MHz
• R (M Ohms) = 0.33
• Only $26.95 each (minimum order is 100 units)
• Standard Lead-Time is 8 weeks ARO. However, this varies and your order confirmation will indicate the actual Lead-Time. An Additional Shipping/Handling Charge, based on your total order quantity, will be invoiced to you seperately.